Use the drivers from our collection easily and widely.

BIOSTAR G31M+ VER. 6.X DRIVERS PC

BIOSTAR G31M+ VER. 6.X DRIVER DETAILS:

Type: Driver
File Name: biostar_g31m_44858.zip
File Size: 30.6 MB
Rating:
3.87
5 (3.87)
Downloads: 5
Supported systems: Windows 10, 8.1, 8, 7, 2008, Vista, 2003, XP
Price: Free* (*Free Registration Required)

Download Now
BIOSTAR G31M+ VER. 6.X DRIVER



These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. The vendor makes no representations or warranties with respect to the contents here and Biostar G31M+ Ver. 6.x disclaims any implied warranties of merchantability or fitness for any purpose.

Further the vendor reserves the right to revise this publication and to make changes to the contents here without obligation to notify any party beforehand. All the brand and product names are trademarks of their respective companies. Table of Contents Chapter 1: Before you start installing the motherboard, please make sure you follow the instructions below: Hold the board on Biostar G31M+ Ver. 6.x edge, do not try to bend or flex the board.

BIOSTAR G31M+ VER. 6.X DRIVERS FOR WINDOWS 10

Loose parts will cause short circuits which may damage the equipment. The package contents may differ by area or your motherboard version.

Biostar G31M+ VerX Mainboard (DDRMHz) Memory G Series

However, when connecting external microphone to the audio port, please use the Line In blue and Mic In Pink audio jack. Remove Pin Cap before installation, and make good preservation for future use.

Pull the socket locking lever out from the socket and then raise the lever up to a degree angle. Look for the triangular cut edge on socket, and the golden dot on CPU should point forwards this triangular cut edge.

NEW DRIVER: BIOSTAR G31M+ VER. 6.X

The CPU will fit only in the correct orientation. Hold the CPU down firmly, and then lower the lever to locked position to complete the installation. This completes the installation.

The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin 1. System Fan Header 1 3 Note: When connecting with wires onto connectors, please note that Biostar G31M+ Ver. 6.x red wire is the positive and should be connected to pin 2, and the black wire is Ground and should be connected to GND. Unlock a DIMM slot by pressing the retaining clips outward. Install memory module of the same density in pairs, shown in the table. Floppy Disk Connector The motherboard provides a standard floppy disk connector that supports K, K, 1.

This connector supports the provided floppy Biostar G31M+ Ver. 6.x ribbon cables. The IDE connector can connect a master and a slave drive, so you can connect up to two hard disk drives. PCI-Express supports a raw bit-rate of 2. This PCI slot is designated as 32 bits. Headers for USB 2.

Biostar G31M+ Ver. 6.x, LGA Socket, Intel Motherboard eBay

Remove AC power line. Wait for five seconds. Power on the AC. Reset your desired password or clear the CMOS data. You will see the following window after you insert the CD The setup guide will auto detect your motherboard and operating system.

Скачать драйвер для Biostar G31M+ Ver. 6.x BIOS Update Utility 1.9.5.0

EXE under your optical drive. Driver Installation To install the driver, please click on the Driver icon. INTEL Socket G31M+ Ver. 6.x gaming motherboard's spec: Socket LGA ; Supports Intel Core 2 Quad/Core 2 Duo/Pentium D/Pentium 4/Celeron Dual. G31M+ Intel G31 Socket LGA Supports Intel Core 2 Quad/Core 2 Duo/Pentium D/Pentium 4/Celeron Dual Core/Celeron Series Processor Supports.

Related Posts